In the right environment, a single spark of static electricity is enough to ruin a circuit board, spoil a cleanroom batch, or ignite fuel vapour. Anti-static coveralls stop that spark at the source — woven with a conductive carbon-fibre grid that safely drains static charge off the wearer instead of letting it build and discharge. BN International General Trading supplies EN 1149-5 anti-static coveralls across Abu Dhabi and the UAE for electronics, cleanroom, fuel and petrochemical teams — full size range, bulk pricing, and cash on delivery.
Need flame protection alongside static control? See our [FR anti-static coveralls] on the Flame Resistant page. Handling liquid chemicals? See Chemical Resistant Coveralls.
Antistatic Coverall, 65 GSM ESD, Navy Blue
AED 45
Cleanroom Anti-Static "Clean XS", White
AED 60
Poly-Cotton Anti-Static, 190 GSM, Navy
AED 55
Poly-Cotton Anti-Static, 190 GSM, Royal Blue
AED 55
Carbon-Grid Anti-Static, 210 GSM, Grey
AED 65
Anti-Static w/ Reflective Tape, 210 GSM, Orange
AED 70
Hooded Anti-Static, ESD Grade, White
AED 68
Anti-Static, Concealed Stud Front, Navy
AED 55
Lightweight Breathable Anti-Static, Sky Blue
AED 50
Anti-Static Lab Coverall, Electronics Grade, White
AED 62
Anti-Static, Elasticated Cuff & Ankle, Green
AED 58
Vaultex MUN 250 GSM Anti-Static FR, Royal Blue
AED 110
Disposable Anti-Static (SMS, ESD), White
AED 22
Anti-Static, Custom Colour / Branding (bulk)
Request quote
An anti-static coverall (also called an ESD or static-dissipative coverall) is workwear built to stop static electricity building up on the body and discharging as a spark. It’s made by weaving a fine grid of conductive carbon-fibre threads through the fabric. That grid gives static charge a safe, continuous path to drain away — instead of collecting on ordinary fabric until it jumps to the nearest surface as a spark.
That spark is harmless in most workplaces. In four, it isn’t:
If your site involves any of these, an ordinary cotton coverall isn’t just insufficient — it can be the hazard itself.
Any coverall can be labelled anti-static. EN 1149-5 is what proves it. It’s the European standard for electrostatic-dissipative protective clothing, and it tests that the fabric actually drains charge (surface resistance / charge decay) rather than just carrying an anti-static claim.
Two points that matter on site:
Anti-static protection only works if the conductive grid runs unbroken and the wearer is properly earthed — usually through anti-static footwear on a dissipative floor. A coverall alone isn’t a complete ESD system; it’s one part of a grounded setup.
Because the protection is woven in (not a surface spray), a genuine EN 1149-5 coverall keeps working through repeated washes, as long as you follow the care label. Wash it wrong, or past its rated wash count, and the dissipative performance drops.
When you request a quote, we confirm the exact EN 1149-5 classification for the coverall and fabric weight you need.
Four things decide which one fits your site:
We supply anti-static and ESD coveralls to industrial sites across Abu Dhabi and the wider UAE — electronics and cleanroom facilities, fuel depots, and petrochemical operations in zones including Mussafah, ICAD, KEZAD and Ruwais, plus sites across Dubai, Sharjah and the other Emirates. Under UAE workplace safety rules, employers must supply PPE matched to the real hazard — and where static ignition or ESD damage is a risk, that means certified anti-static workwear, not ordinary coveralls. We hold stock in Abu Dhabi and source additional specs to order, so a crew is never left waiting.
Anti-static coverall price depends on fabric weight, grade (standard ESD vs cleanroom vs dual-hazard FR) and order quantity:
Grade | Starting from (AED/piece)
| Typical use
|
|---|---|---|
| Light ESD / cleanroom | from ~AED 45 | Electronics, cleanroom, indoor controlled work |
| Standard industrial anti-static | from ~AED 55 | General ESD and static-risk sites |
| Dual-hazard (anti-static + FR) | from ~AED 110 | Fuel, oil & gas, petrochemical (see FR page) |
Order quantity
| Rate
|
|---|---|
| 50–199 pcs | Standard wholesale rate |
| 200–499 pcs | Reduced bulk rate |
| 500+ pcs | Lowest wholesale rate |
Custom colours and logo branding are available on bulk orders. We source specialist specs to order, so if your requirement isn't in the grid, we supply it rather than turn you away.
Based in Al Nahyan, Abu Dhabi, we hold anti-static stock locally and dispatch in-stock orders quickly, with delivery across every Emirate. Bulk and project orders are scheduled around your site. We accept cash on delivery — pay when your order arrives — plus bank transfer and corporate invoicing for account and project customers.
A grid of conductive carbon-fibre threads woven through the fabric drains static charge safely off the wearer, preventing the build-up that would otherwise discharge as a spark.
No. Anti-static coveralls control static; flame-resistant coveralls resist ignition and heat. Some garments do both (dual-hazard) — needed around flammable vapour — but a standard anti-static coverall is not flame-resistant on its own.
No, if it’s genuine EN 1149-5 — the conductive grid is woven in, not sprayed on, so it survives repeated washing when you follow the care label and stay within the rated wash count.
Yes, for a complete system. The coverall drains charge off the body, but the wearer must be earthed — usually through anti-static footwear on a dissipative floor.
Yes. We stock a core range and source additional specs, colours and sizes to order — you won’t be left without the coverall you need.
Yes — single orders through to full-crew and project contracts, with bulk pricing, cash on delivery, and delivery across every Emirate.
Get Started Today
Tell us your environment — electronics, cleanroom, fuel or general ESD — plus sizes, colour and quantity, and we’ll match the right EN 1149-5 coverall and confirm your price, usually the same working day. If it’s not in stock, we source it.
Supplying anti-static coveralls to Abu Dhabi, Dubai, Sharjah, Ajman, Ras Al Khaimah, Fujairah and across the UAE.
