Opens in a new tab

Abu Dhabi · UAE-Wide Supply

Gas Detectors in Abu Dhabi & Across the UAE

Every portable detector below is a personal industrial monitor — a clip-on single-gas unit, a 4-gas confined-space instrument, or a dedicated H₂S detector. BN International General Trading supplies certified gas detection from our Al Nahyan, Abu Dhabi base to sites across all seven Emirates: Honeywell BW and SENKO, ATEX/IECEx certified, with the ADNOC-approved SENKO H₂S detector for oil & gas. Pick a unit from the range below, or send us the gas and quantity and we’ll confirm the right model.

Searching for a “4-gas”, “H₂S personal monitor”, or a specific BW model? They’re all in the grid — filter by what the job needs to see.

SENKO SP-SGT H₂S single-gas

Disposable 2-yr, maintenance-free · IP67 · 90 dB · ATEX/IECEx/CSA-UL913

from ~AED 340

SENKO SP-SGT CO single-gas

Disposable 2-yr · CO 0–500 ppm · IP67 · ATEX/IECEx/CSA

from ~AED 340

SENKO SP-SGT O₂ single-gas

Disposable 2-yr · O₂ 0–30 %vol · IP67 · 90 dB

from ~AED 360

Honeywell BW Clip H₂S — 2-year

Maintenance-free, no calibration · 92 g · IP66/67 · ATEX/IECEx

from ~AED 330

Honeywell BW Clip H₂S — 3-year

3-yr maintenance-free · hibernation mode · one-button · 95 dB

from ~AED 450

Honeywell BW Clip CO — 2/3-year

Maintenance-free · CO 0–300 ppm · IP66/67 · ATEX/IECEx

from ~AED 340

Honeywell BW Clip Real Time

Real-time gas readout + calibratable · H₂S / CO · ATEX/IECEx

from ~AED 520

Honeywell BW Flex 4 — 4-gas

H₂S·CO·O₂·LEL · IP66/68 · STEL/TWA · rechargeable

from ~AED 1,950

Honeywell BW Flex 5 — 5-gas

Up to 5 of 14 sensor types (+CO₂ / exotic) · IP66/68

from ~AED 2,400

Honeywell BW MicroClip XL

H₂S·CO·O₂·LEL · compact diffusion · 2-yr run

from ~AED 1,880

Honeywell BW Max XT II

Integrated pump for confined-space pre-entry · H₂S·CO·O₂·LEL

from ~AED 2,680

SENKO SP-SGT — SO₂/NH₃/NO₂/Cl₂/H₂

Disposable 2-yr · one gas per unit · IP67 · ATEX/IECEx/CSA

from ~AED 380

Can't see the exact gas or model? We source across Honeywell BW, SENKO, MSA and Dräger to order. Prices are a market guide, confirmed on quote.

By hazard count

Three ranges — pick by how many hazards the wearer must see

The first cut on a gas detector isn’t the brand on the case — it’s how many atmospheric hazards one person has to watch at once. That’s how this category splits, and where each sub-range goes deeper.

Single-gas detectors

One named gas on a clip-on unit, issued and replaced at end of life (2- or 3-year). The economical choice when the risk is a single known hazard: H₂S at a sour-gas site, CO near combustion, O₂ in a tank. The disposable SENKO SP-SGT and Honeywell BW Clip live here.

See single-gas detectors

Multi-gas (4-gas) detectors

One instrument reading H₂S, CO, O₂ and LEL together — the standard for confined-space entry and general plant work. Diffusion for wear-and-monitor; pumped for pre-entry sampling before anyone goes in.

See 4-gas detectors

H₂S gas detectors

Personal hydrogen sulphide monitoring, the single most common toxic risk on UAE oil & gas sites — including units written to the ADNOC HSE-OS-ST20 §9.8 personal H₂S spec.

See H₂S detectors

Prefer to choose by maker instead of by hazard? See the Brands we supply section below — Honeywell BW and SENKO, plus MSA and Dräger to order.

Request a Quote

How to specify

Single-gas or 4-gas? A 20-second decision

If the job is…
Reach for
Why
One known toxic or O₂ risk, issued per worker Single-gas Lower cost, zero maintenance, 2–3 yr life then replace
H₂S, CO, O₂ and LEL all matter (confined space, plant) 4-gas (diffusion) One unit covers the four confined-space gases
Testing a space before anyone enters 4-gas (pumped) A pump draws a sample through a hose — a chest-worn diffusion unit can't do pre-entry sampling
Personal H₂S on a sour-gas / ADNOC site H₂S single-gas Purpose-built, with a certified personal option
Kitchen/LPG alarm, refrigerant sniffer, flue analyser, fixed XNX transmitter Not this range Different product class — ask and we'll point you right

A 4-gas instrument is the right answer when those four gases all matter — not automatically the answer for one known H₂S or CO risk, which is a single-gas unit at a fraction of the cost.

Where gas detectors are used

Portable gas detection isn’t one job — it’s wherever the air can turn toxic, flammable, or short of oxygen without warning. The setting usually decides both the gas and the type of unit:

  • Confined-space entry (tanks, vessels, silos, pits, manholes) — O₂, H₂S, CO and LEL; a 4-gas unit, pumped for pre-entry testing.
  • Oil & gas — onshore, offshore and sour-gas wells — H₂S first, plus LEL and O₂; an H₂S single-gas alongside a 4-gas, and the SENKO §9.8 unit on ADNOC sites.
  • Refineries & petrochemical (Ruwais, KEZAD) — H₂S, SO₂, LEL and CO; 4-gas plus specialty single-gas.
  • Sewers, wastewater & drainage — H₂S, methane (LEL) and O₂ depletion; 4-gas.
  • Construction & civil — excavations, tunnels, deep trenches — O₂, LEL, CO and NO₂; 4-gas.
  • Marine & shipping — holds, engine rooms, ballast tanks — O₂, H₂S, LEL and CO; 4-gas.
  • Chemical manufacture & storage — Cl₂, NH₃, SO₂ and LEL; specialty single-gas plus 4-gas.
  • Cold storage, food & beverage, breweries — CO₂, NH₃ refrigerant and O₂; CO₂ / NH₃ single-gas.
  • Welding & hot work — CO, O₂ depletion and shielding-gas buildup; single-gas or 4-gas.
  • Utilities, power & battery rooms — CO, LEL and H₂; single-gas or 4-gas.
  • Firefighting & emergency response — CO, HCN, O₂ and LEL; 4-gas.

The gas you need to see decides the unit more than the industry name does — so if your setting isn’t listed above, the hazard still points to the right detector.

WhatsApp

Sensor reference

Which gases these detectors detect

A gas detector only monitors the gas its sensor is built for — so the gas you need to see decides the unit. Here’s the full range our detectors cover, what each gas does, and where it turns up:

Gas
Symbol
The hazard
Typically found around
On which range
Hydrogen sulphide H₂SToxic — fatal at high ppm, deadens smell fast Sour gas, oil & gas, sewers, tanks Single-gas · H₂S · every 4-gas
Carbon monoxide COToxic — odourless, from incomplete combustion Engines, boilers, welding, fires Single-gas · 4-gas
Oxygen O₂Depletion (suffocation) and enrichment (fire risk) Confined spaces, inerted vessels Single-gas · 4-gas
Combustible / flammable gases LEL Explosion — methane, propane, solvents, vapours Pipelines, refineries, fuel stores 4-gas (catalytic-bead or IR)
Carbon dioxide CO₂ Asphyxiant at high concentration Cold storage, breweries, cellars BW Flex · select single-gas
Sulphur dioxideSO₂Toxic, irritant Refineries, smelting, combustion SENKO single-gas · BW Flex
Ammonia NH₃ Toxic, corrosive Refrigeration plant, fertiliser, food SENKO single-gas · BW Flex
Nitrogen dioxide / nitric oxide NO₂ / NO Toxic exhaust / process gas Diesel plant, tunnels, mining SENKO single-gas · BW Flex
Chlorine Cl₂Toxic, corrosive Water treatment, pools, chemical plant SENKO single-gas · BW Flex
HydrogenH₂Flammable / explosive Battery rooms, electrolysis SENKO single-gas · BW Flex
Hydrogen cyanide HCNHighly toxic Plating, fumigation, fire overhaul BW Flex

H₂S, CO, O₂ and LEL are the four "confined-space" gases — the standard 4-gas set. The rest are specialty sensors, fitted per application. A few sensor pairings aren't possible in one unit because of cross-sensitivity.

Brands we supply

Brands we supply

We lead with Honeywell BW and SENKO — the two lines we move most from Abu Dhabi, covering everything from a disposable single-gas clip to a connected 5-gas instrument.

Honeywell BW gas detectors

Maintenance-free BW Clip single-gas, plus BW Flex, MicroClip XL and Max XT II multi-gas — ATEX/IECEx/CSA certified, with IntelliDoX and Safety Suite for automated testing.

See Honeywell BW gas detectors

SENKO gas detectors

The SENKO SP-SGT disposable single-gas detector — built to the ADNOC HSE-OS-ST20 §9.8 H₂S spec, ATEX/IECEx/CSA certified, two-year maintenance-free. The unit to ask for on ADNOC sour-gas sites.

See SENKO gas detectors

MSA Safety and Dräger also sourced to order, quoted to the same spec.

Certification

Certified for hazardous areas

Every detector on this page is built for potentially explosive atmospheres and carries recognised hazardous-area certification — so it’s approved to be switched on where flammable gas may be present:

  • ATEX — EU Directive 2014/34/EU (e.g. II 1G Ex ia IIC T4 Ga).
  • IECEx — the international IEC scheme (Ex ia IIC T4 Ga).
  • CSA / UL-913 — North American intrinsic safety (Class I, Div 1, Groups A–D).
  • Ingress protection — IP66 / IP67 / IP68 by model.
  • ADNOC HSE-OS-ST20 §9.8 — the ADNOC personal H₂S detector spec, met by the SENKO SP-SGT.

The exact certificate for the model and configuration you order — including the SENKO SP-SGT’s ATEX EU-Type Examination Certificate and IECEx/CSA documentation — ships with the unit for your HSE file. Full ADNOC §9.8 detail is on the [H₂S gas detectors] page.

Pricing

Gas detector prices in the UAE

Two things move the price: single-gas vs multi-gas, and for multi-gas, diffusion vs pumped plus the sensor set. Indicative UAE market ranges (Sep 2026) — a guide for orientation, not BN International General Trading’s quoted price:

Range
Market guide (AED)
What moves it
Single-gas (incl. H₂S) from ~AED 300 Gas type, 2-yr vs 3-yr life, disposable vs serviceable
Multi-gas — 4-gas diffusion ~AED 1,880–2,200 Sensor set, brand
Multi-gas — 4/5-gas pumped or connected ~AED 2,400–2,800 Integrated pump, Bluetooth, 5th sensor

Per-unit cost drops on crew and project quantities. We quote the real price for your exact model and volume — send the gas, model preference and quantity. Cash on delivery is available, alongside bank transfer and corporate invoicing for account customers.

Why buy gas detectors from BN International General Trading

  • ADRA-licensed, real office, real people. Registered with the Abu Dhabi Regulation & Supervision Bureau under licence CN-6387714, with a physical Al Nahyan office and a team that answers the phone — not a drop-ship listing.
  • The ADNOC-approved H₂S detector. We supply the SENKO SP-SGT built to ADNOC HSE-OS-ST20 §9.8 — the spec that matters most on Abu Dhabi oil & gas sites.
  • We match the model to the hazard. We confirm which detector fits your gas, application and environment, rather than leaving you to read a spec sheet alone.
  • Quoted, not guessed. Price and availability are confirmed for the exact model and configuration — never estimated from a catalogue line.
  • We never send you away empty-handed. If a model isn’t on our shelf we source it across the Honeywell BW, SENKO, MSA and Dräger ranges and tell you the lead time plainly.
  • UAE-wide delivery. To every Emirate and the industrial zones most of it goes to — Mussafah, ICAD, KEZAD, Ruwais, JAFZA and Hamriyah.

FAQ

Frequently asked questions

Yes — smell is not a safe warning. H₂S deadens your sense of smell within minutes at dangerous levels, so it can seem to “disappear” as it gets more lethal, and gases like carbon monoxide and methane have no smell at all. A detector reads the actual concentration; your nose can’t.

Disposable units like the BW Clip and SENKO SP-SGT run 2 or 3 years from activation, then the whole device is replaced — no sensor swaps. Serviceable multi-gas detectors keep going for years, but their individual sensors have their own lives (roughly 2–5 years) and are replaced as they age. Unactivated stock also has a shelf life, so we rotate to supply fresh units.

In practice, yes. UAE occupational-safety frameworks — OSHAD in Abu Dhabi, and the permit-to-work systems on ADNOC and major contractor sites — require the atmosphere to be tested before entry and monitored throughout. A calibrated direct-reading detector is how that requirement is met.

The low alarm is an early warning — take action or prepare to leave. The high alarm means evacuate now. Multi-gas units add TWA and STEL alarms, which track your average exposure over a full shift and over any 15-minute window, catching slow build-ups a single reading would miss.

Yes — the units we supply are rated to +50°C ambient (and down to −40°C), covering UAE outdoor conditions, with 5–95% humidity tolerance. The one thing to avoid is leaving a detector on a dashboard or in a sealed vehicle, where temperatures climb well past the rated limit and can shorten sensor life.

Get Started Today

Get the right gas detector for your site

Send the gas, the application and how many units you need — we’ll confirm the right model, the certification, a price and current availability, usually the same working day. One clip-on H₂S unit or a full confined-space kit, we quote it the same way.

Supplying gas detectors across Abu Dhabi, Dubai, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and the wider UAE.

Call Now Button